VooPoo presents the VooPoo Drag Mini 117W TC Starter Kit, a perfect matching of the DRAG Mini 117W Gene.FIT Chip Box Mod and the redesigned UFORCE T2 Sub-Ohm Tank. The upgraded Gene.FIT chip is secured by a V0 class fireproofing bridge to block liquid, dust, or burnout. The new chip has an increased 5W to 117W power output, 0.05ohm to 5.0ohm resistance, 0V to 7.5V output, and 40A max current output. The Drag Mini 117W now features the FIT Mode, allowing the device to auto detect optimal power output for the installed sub-ohm tank and allows the user to select from three preset levels. Fit 1 is Battery Setting, allowing the user to conserve battery at the lowest recommended output for the installed coil head. Fit 2 is Flavor Setting, which gives medium output with an emphasis on flavor production. Fit 3 is Cloud Setting which provides maximum power for maximum cloud production. The VooPoo Drag Mini 117W has a 5 bank memory for user defined settings. The new Gene.FIT chip also comes with a temperature control suite that has an atomizer resistance of 0.05ohm to 1.5ohm, temperature range of 200°F to 600°F and is compatible with nickel, titanium, and stainless steel. VooPoo has retained the three button control scheme with an enlarged firing button and two adjustment buttons. VooPoo has changed the Mini to have a built-in 4400 mAh battery that can be charged through the micro-USB port. The Drag Mini 117W box mod has a 0.91 Inch OLED display that shows temperature mode and output, output power, atomizer resistance, and battery life indicator. The body of the Drag Mini 117W is considerably smaller than the previous design but retains the beautiful zinc alloy frame, Drag lettering on one panel, and a gorgeous resin plate on the other. On top of the device is a spring loaded gold plated 510 connection with a stainless steel thread point. This box mod also comes with a host of protections such as battery reverse protection, over charge protection, and balanced battery charging. The VooPoo 117W has been paired with the redesigned UForce 24.6mm Sub-Ohm Tank that has a 5mL bubble glass e-liquid capacity and 3.5mL capacity with the standard glass tank. This sub-ohm tank's top fill port can be accessed through a slide-to-fill top cap. The UForce T2 Sub-Ohm Tank is compatible with the entire UForce replacement coil family and comes with the U2 and N2 replacement coils. The UForce U2 is a dual kanthal coil with an atomizer resistance of 0.4 ohm, recommended range of 40W to 80W, and is best at 55W to 65W. The new UForce N2 coils are dual kanthal mesh, have a resistance of 0.3 ohm, a recommended range of 45W to 80W, and is best at 55W to 65W. The UForce T2 has three fully adjustable 10mm by 3mm air slots. The UForce T2 has a stainless steel 510 threading, 24K gold plated contact and a 14mm wide 810 bore drip tip. The VooPoo DRAG Mini 117W TC Starter Kit is an excellent miniaturization of the dependable VooPoo Drag 2 and is an excellent device for daily use.
VooPoo Drag Mini 117W Battery Features:
- Dimensions - 81.5mm by 48.5mm by 25.5mm
- Integrated 4400mAh Rechargeable Battery
- Highly Advanced GENE FIT Chip
- Wattage Output Range: 5W to 117W
- Voltage Output Range: 0V to 7.5V
- Resistance Range - Power Mode: 0.05ohm - 3.0ohm
- Resistance Range - TC Mode: 0.05ohm to 1.0ohm
- Temperature Range: 200°F to 600°F / 100°C to 315°C
- Supports Ni200, Titanium, Stainless Steel Compatibility
- TCR Adjustments Mode
- Battery Set
- Flavor Set
- Cloud Mode
- POWER Mode
- Superior Zinc Alloy Chassis Construction
- Visually Striking Resin Inlay Design
- Intuitive OLED Screen
- Large Firing Button
- Mode-Setting Button
- Two Adjustment Buttons
- Magnetized Battery Door Cover
- Over Temperature Protection
- Output Over-Current Protection
- Overcharge Protection
- Over Discharge Protection
- Short-Circuit Protection
- Switch Timeout Protection - 10 Seconds
- Brand Balance Battery Charging
- MicroUSB Port
- Centered 510 Connection
- Available in Atrovirens, Purple, Lava, Prussian Blue, Rhodonite, and Phthalo
VooPoo UForce T2 Sub-Ohm Tank Features:
- 25mm Tank Diamenter
- 28mm At Widest Point
- 3.5mL Standard Juice Capacity
- 5mL Maximum Juice Capacity
- Superior 304 Stainless Steel Construction
- Pyrex Glass Reinforcement
- Quick Vent Channel Design - Rapid Heat Discharge
- Short Chimney - Flavor-Focused
- UFORCE OCC Coil Technology
- 0.6ohm P2 Single Mesh Coil - rated for 24W to 28W
- 0.13ohm N1 Single Mesh Coil - rated for 50W to 100W
- Convenient Sliding Top-Fill Method
- Precision Triple Auxiliary Bottom Airflow Control
- 14mm Resin Wide bore Drip Tip - Vibrant Color ways
- 24K Gold-Plated 510 Connection
- 1 DRAG Mini 117W Mod
- 1 UFORCE T2 Sub-Ohm Tank
- 1 0.6ohm P2 Single Mesh Coil
- 1 0.13ohm N1 Single Mesh Coil
- 1 Spare Glass Tube (3.5mL)
- 1 MicroUSB Cable
- 1 Spare Parts Bag
- 1 Instructional Manual
- 1 Warranty Card
Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Make sure to properly prime each coil before use.
We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out micro USB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with a similar brand, model, and battery state at all times.
In order to use temperature control feature, it requires the use of nickel, titanium, or stainless steel coils.
Warning: Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.
Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. TheVapeShopLA.com and any of TheVapeShopLA.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge of all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages to the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment.
TheVapeShopLA.com and any or all of TheVapeShopLA.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.